How to flash dead nokia using phoenix

process is long but easy. and result will really give you a smile when your dead phone will work like new.
Your mobile is dead? or its just getting restarting again and again or its some applications has been disappeared?
This tut is based on my personal experience with nokia 7210 supernova
No problem-Here is the simple tutorial which will teach you how you can flash your phone using your own pc
Before starting, i would like to tell you that try it at your own risk. Writer doesn't take any type of responsibility for damage to your phone.
backup your phone memory to avoid any unusual situation.Remove memory card and sim card from the phone.
Let's start:-
Tools required:- 3 | Password for downloading files are "wapspell.com" without quotes.
1. phoenix service suite:- for flashing your phone http://jumbofiles.com/c10rnhr3zba5/Identity-Phoenix_Service_Software_2010.12.11.42838_Cracked.rar.html -96.9 Mb
2. Navifirm:- for downloading firmware from nokia http://jumbofiles.com/tutmadd4kaps/Identity-navifirm.exe.html -71.5 Kb
3. Original Nokia Data Cable
Step-1
Install phoenix and run navifirm and download your phone's firmware(total 6 files=about 25 mb).
step-2
After downloading firmware files,create a folder RM-XXX in c:\Program files\Nokia\Phoenix\Products and copy those firmware files in the folder.
(RM-XXX where XXX is your product code(for eg. Nokia 7210 supernova product code is 436, so RM-436)
step-3
->Turn on the phone (it will start in offline mode because there is no SIM card inside).
->Plug in the USB cable to both the phone and the computer.
->When prompted, select “PC Suite” from the menu list on the phone.
->Wait for *all* drivers to fully install themselves before proceeding. You will see the driver icon disappear when it is complete.
[if you have dead phone, means phone is not starting at all, use Dead Phones Flash. To being able to tick dead phone flash delete the usb connection in phoenix. then make it go into "no connection". then open the rm-xxx. the dead usb flashing will now be enabled.]
step-4
Now Choose File Then Manage Connection
-> “New”
-> USB, and then Next
->It will then search your USB ports for the phone. When it finds it, hit Finish
->Once it has finished scanning, apply, then close.
->Next, select “Scan Product” from the File menu.
->Once finished scanning, you can see your model of phone and other details at the bottom screen.
->From the Flashing menu, choose Firmware Update.
->Wait for Phoenix to continue talking to the phone. You will see some information scroll by in the firmware Update window.
->Browse
->See the product code section.U should find ur product code in that column.If u see “ur” product code,well and good.
->but if u dont see ur code,or dont see anything for that matters,press on the “…” in the given prCode section.
You should see RMxxx-blabla, select that. Variant version =00. I will select “Refurbish” so that it will restore it to factory set (Clean and default C:).
step-5
Hit start and ignore the warning and click yes.
step-6
wait. . .
The flashing process takes about five minutes to complete. The first few steps ensure connectivity to the phone.
After it verifies connectivity,Phoenix will automatically restart the phone.
Once it has completed (a dialog box will popup saying it has completed successfully), you may close Phoenix,
unplug the USB cable, and restart your phone. It should startup with the firmware you flashed to it.
FINISH
If you face any proble regarding the tut given above, just post it here.